C:\E2000-Logik\E2000-Logik_2.1.2\tools\isp>avrdude -p m644 -b 115200 -c avr910 -P COM4 -e -U lfuse:w:0xff:m -U hfuse:w:0xd9:m -U efuse:w:0xfc:m -U flash:w:E2000-NET-IO.hex
Found programmer: Id = "AVR ISP"; type = S
Software Version = 3.8; Hardware Version = 1.2
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize = 64 bytes.
Programmer supports the following devices:
Device code: 0x13 = AT90S1200
Device code: 0x20 = ATtiny84
Device code: 0x28 = AT90S4414
Device code: 0x30 = AT90S4433
Device code: 0x34 = AT90S2333
Device code: 0x38 = AT90S8515
Device code: 0x48 = (unknown)
Device code: 0x4c = AT90S2343
Device code: 0x51 = (unknown)
Device code: 0x55 = ATtiny12
Device code: 0x56 = ATtiny15
Device code: 0x68 = AT90S8535
Device code: 0x6c = AT90S4434
Device code: 0xffffff86 = (unknown)
Device code: 0xffffff87 = (unknown)
Device code: 0x04 = (unknown)
Device code: 0x05 = (unknown)
Device code: 0x06 = (unknown)
Device code: 0x07 = (unknown)
Device code: 0x1a = (unknown)
Device code: 0x1b = (unknown)
Device code: 0x1c = (unknown)
Device code: 0x1d = (unknown)
Device code: 0x23 = (unknown)
Device code: 0x31 = (unknown)
Device code: 0x33 = (unknown)
Device code: 0x37 = (unknown)
Device code: 0x39 = (unknown)
Device code: 0x3d = (unknown)
Device code: 0x3e = (unknown)
Device code: 0x57 = (unknown)
Device code: 0x3a = ATMEGA8515
Device code: 0x3b = (unknown)
Device code: 0x41 = ATMEGA103
Device code: 0x43 = ATMEGA128
Device code: 0x44 = (unknown)
Device code: 0x45 = ATMEGA64
Device code: 0x46 = (unknown)
Device code: 0x5e = ATtiny2313
Device code: 0x60 = ATMEGA161
Device code: 0x61 = (unknown)
Device code: 0x62 = (unknown)
Device code: 0x63 = ATMEGA162
Device code: 0x64 = ATMEGA163
Device code: 0x66 = (unknown)
Device code: 0x69 = ATMEGA8535
Device code: 0x6a = (unknown)
Device code: 0x72 = ATMEGA32
Device code: 0x73 = (unknown)
Device code: 0x74 = ATMEGA6450
Device code: 0x75 = ATMEGA6490
Device code: 0x76 = ATMEGA8
Device code: 0x77 = (unknown)
Device code: 0x78 = ATMEGA169
Device code: 0x79 = (unknown)
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9609
avrdude: erasing chip
avrdude: reading input file "0xff"
avrdude: writing lfuse (1 bytes):
Writing | ################################################## | 100% 0.16s
avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xff:
avrdude: load data lfuse data from input file 0xff:
avrdude: input file 0xff contains 1 bytes
avrdude: reading on-chip lfuse data:
Reading | ################################################## | 100% 0.05s
avrdude: verifying ...
avrdude: 1 bytes of lfuse verified
avrdude: reading input file "0xd9"
avrdude: writing hfuse (1 bytes):
Writing | ################################################## | 100% 0.16s
avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0xd9:
avrdude: load data hfuse data from input file 0xd9:
avrdude: input file 0xd9 contains 1 bytes
avrdude: reading on-chip hfuse data:
Reading | ################################################## | 100% 0.05s
avrdude: verifying ...
avrdude: 1 bytes of hfuse verified
avrdude: reading input file "0xfc"
avrdude: writing efuse (1 bytes):
Writing | ################################################## | 100% 0.16s
avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xfc:
avrdude: load data efuse data from input file 0xfc:
avrdude: input file 0xfc contains 1 bytes
avrdude: reading on-chip efuse data:
Reading | ################################################## | 100% 0.05s
avrdude: verifying ...
avrdude: 1 bytes of efuse verified
avrdude: reading input file "E2000-NET-IO.hex"
avrdude: input file E2000-NET-IO.hex auto detected as Intel Hex
avrdude: writing flash (44810 bytes):
da steht die Software nun seit über 40 Minuten, tut sich da evtl. noch etwas oder hängt da was ?